Random good picture Not show

91 Finite element method combined with boundary collocation method is used to calculate the stress intensity for the heel of gravity dams in this paper.

92 The rigidity calculation of the closed thin - walled section rod structure of aircraft is carried out by using finite element method and the result tallies with the full - scale test value well.

93 Professor Maattanen presented a finite element model for analysis of ice forces on a large cone structure on the basis of field experience of the Kemi-I lighthouse in the Gulf of Bothnia.

94 The effect of gas hole location on SMT solder joint fatigue life has been analyzed by finite element method .

95 Both the proposed method and finite element method were applied to analyze the dynamic responses of a two-layer plate subjected to rectangular impulsive load,(http://sentencedict.com/finite element.html) and the results show a good agreement.

96 Authors suggest a practical method based on dynamic analysis of finite element for modifying natural frequencies of hull grillage beam, and its software is completed.

97 Using of Finite Element Method, numerical simulation of cold pressure welding processes was done.

98 The finite element method is well adopted to complex problems in applied mechanics and related.

99 Objective: To explore the method to construct three-dimensional finite element model for maxillary posterior-tooth area, maxillary sinus, zygoma and zygomatic implant.

100 Based on the inverse iteration method, an iterative technique for dynamic condensation of finite element models has been derived in this paper.

101 A coupled magnetic - circuit - fluid thermal finite element model is proposed for thermal analysis of dry - type air-core reactor.

102 The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .

103 Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.

104 Based on this project, this paper has used the finite element method to analyze the similar isotrope rock slope with accumulative stratum.

105 The electromagnetic field analysis in charging capacitor and pulse transformer is carried out by employing an ANSYS software for, which is based on the finite element method (FEM).

106 It takes up a major part of the total time of the finite element analysis.

107 The cross-coupling between the cells of electrostatically driving matrix is first studied by means of Finite Element Method (FEM) and the results have been applied in designing optical switch matrix.

108 This paper describes a structure strength computation of a certain mounting rack for airborne computer by the use of the finite element method.

109 According to the principle of virtual work, finite element equation can be directly derived to determine wave field of transient elastic wave.

110 The finite element analysis of the magnetic field for a MR valve of the damper was done via ANSYS package, and the magnetic flux density of MR valve was obtained.

111 Using the pressure minimum integral, finite element equations are obtained based on the full potential equation.

112 This paper extends the theoretical model and application scope of multi-stage compound option and path-dependent option using Finite Difference Method and Finite Element Method.

113 The problem of achieving stable reliability analysis of piezoelectric trusses with random parameters was studied on the basis of the finite element analysis method and stable secular equation.

114 Comparing the results of upper and lower membranes leakage test and finite element computer simulation proved that the model was correct.

115 The sparse finite element is considered for solving eigenvalue problems. Based on an interpolation postprocessing, superconvergence estimates of both eigenfunction and eigenvalue are obtained.

116 The predicted transmission loss of perforated tube silencers using the finite element method and experimental results are compared and showed good agreement.

117 Numerical simulation of multi point bending process of strip under different loading paths is dealt with the finite element polycrystal model.

118 Furthermore, the soldering process of PCBA in the whole infrared reflow soldering stove is modeled by the finite element software, ANSYS, and is simulated by the three-dimensional modelling.

119 Analyzing the heat transfer of thermometric sensor for liquid steel, a relevant finite element model is developed for the sensor.

120 The stress field of composite plate subjected to low velocity impact was simulated using finite element soft package of ANSYS.